SteyrTek adapter
 

• Thickness: 1 inch = 25.4 mm

• Bolt pattern: 5x112 / 5x114,3

• Center hole diameter on the inner side: 66,6 mm
• The outer diameter of the outside collar (serving as a substitute for the car's axle): 60,1 mm

• Outer diameter: 160 mm

• The package contains 1 piece

Use a hub centric ring to ensure that the adapter is properly centered on the car. Choose a hub centric ring that has the same outer diameteras the inner diameter of the adapter (66.6 mm) and the same inner diameter as the diameter of your car's axle.

https://www.tyrelia.com/wheel-accessories-hub-centric-rings-c-90_161.html

With this adapter, you can reduce the offset in a car with a 5x112 bolt pattern by shifting the wheel outwards by 25 mm. The bolt pattern changes from 5x112 to 5x114,3. The stud bolts and nuts (thread pitch: 1.5 mm, thread diameter: 12 mm) for mounting the wheel on the adapter are included in the delivery. However, the bolts for installing the adapter on the car's hub are not included. Please use the car's own bolts. If the adapter is especially thin, you may have to shorten the bolts or purchase bolts with lower heads.

This fine SteyrTek adapter is made of high-quality aluminium. For racing only.